CAPABILITIES
Everything between the process and the power.
Automation, power, instrumentation, panels, rotating-equipment controls and renewables, delivered as one E,I&C package or as a single specialist scope.
CAP-01
Automation & Control Systems
We design, program, build and commission control systems that operators trust: clean architectures, ISA-101 graphics, ISA-18.2 alarm management and documentation that survives handover.
- PLC & RTUControlLogix, CompactLogix, SIMATIC S7-200 to S7-1500, Modicon and Emerson PLCs, including redundant hot-standby pairs and remote RTUs.
- DCSPlantPAx and DeltaV architectures for gas processing and generation, from front-end design to hot cutover, with migration of Foxboro I/A systems.
- SCADA & HMIFactoryTalk View SE/ME, WinCC and Emerson SCADA with historians, reporting and remote telemetry for oil, gas, power and solar sites.
- Safety systemsESD and fire & gas logic on Triconex TMR and SIL-rated platforms, cause & effect matrices and proof-test procedures.
- Alarm & HMI designISA-101 high-performance displays and ISA-18.2 alarm rationalisation for control rooms that stay calm under upset.
- Cloud & telemetryTank gauging, well and pipeline data brought to dashboards over secure telemetry, from field radar to the cloud.
CAP-02
Power Management & Electrical
Power is where control meets electrical. We engineer the power-management system and build the electrical installation around it, so generation, distribution and load shedding work as one.
- Power management (PMS)Synchronisation, load sharing, load shedding and grid-tie control on SICAM 8000, DEIF AGC, Woodward easYgen, DeepSea and Logix-based systems.
- Hybrid plantsPV, battery storage and genset hybrids with minimum-load, spinning-reserve and island/grid-parallel modes.
- MV / LV constructionCable laying, glanding and termination up to 36 kV, transformer and switchgear installation, earthing and lightning protection.
- SubstationsSwitchgear, power transformers, RTCC and DC systems tested and energised, with protection and injection testing.
- StudiesLoad-flow, short-circuit and protection coordination studies in ETAP to support design and commissioning.
- Fibre & networksFibre-optic splicing and industrial Ethernet for plant control and substation networks.
CAP-03
Instrumentation & Field Services
Reliable control starts at the transmitter. Our instrument teams install, calibrate and loop-check field devices and hand over loops that read true on day one.
- Field instrumentsPressure, level, flow and temperature transmitters, control and servo valves, actuators and switches.
- Tank gaugingRadar tank-gauging systems on Endress+Hauser with custody-grade accuracy and cloud telemetry.
- Machinery protectionBently Nevada 3500/3300 vibration monitoring and ADRE diagnostics; anti-surge control (CCC, GE, Siemens).
- Loop checkingPoint-to-point and loop checks from field device to HMI faceplate, with signed loop folders.
- CalibrationCalibrated bench and field calibration for pressure, level, flow and temperature at our Aden workshop.
- DigitalisationChart recorders and manual readings converted to PLC calculation and historian data.
CAP-04
Panel Building & FAT
Panels are where design becomes hardware. We engineer them in EPLAN, build to the specification and run a factory acceptance test with the client before anything leaves the shop.
- Control panelsPLC/RTU, marshalling, network and server panels, including redundant controller cabinets.
- Power panelsLV switchboards, MCCs and synchronisation panels for DEIF, Woodward and DeepSea controllers.
- Safety panelsFire & gas and ESD panels with SIL-rated logic solvers and certified components.
- EngineeringEPLAN schematics, 3D layouts, heat-load and I/O sizing with documented spare capacity.
- FATFactory acceptance tests with full network and hierarchy verification, witnessed by the client.
- Outdoor designsIP66 enclosures and climate control for Gulf and desert sites.
CAP-05
Turbine & Engine Controls
Our engineers carry OEM-grade experience on rotating equipment. We upgrade the controls, support the overhaul and prove the result with a performance test.
- Control retrofitsGE Mark IV to Mark VIe and FT100 to FT125 upgrades, with ToolboxST and CIMPLICITY.
- OverhaulsMajor and top-end overhauls with borescope inspection on GE Frame 5 and other units.
- Performance testingGas-turbine performance tests and acceptance reporting.
- Governors & excitationWoodward governors and generator control integration.
- EnginesGas and diesel engine controls for Rolls-Royce Bergen, Caterpillar, Waukesha, Cummins and Perkins units.
- Remote supportRemote engineering support for LM2500 and TM2500 packages.
CAP-06
Solar, BESS & Hybrid Plants
Solar plants live or die by their electrical works and their controls. We deliver both: MV/LV installation, tracker and weather-station integration, plant SCADA and hybrid power management.
- Electrical worksDC and AC cabling, inverter stations, MV terminations and substation works on utility-scale plants.
- Plant SCADATurnkey SCADA for PV and BESS plants: trackers, weather stations, inverters, meters and grid interface.
- Hybrid controlSolar + genset + BESS power management with minimum-load protection and fuel saving.
- CCTV & securityComplete plant CCTV and perimeter solutions integrated with the control room.
- CommissioningPre-commissioning, energisation and performance testing through handover.
- O&MOperation and maintenance support for on-grid and off-grid plants.
CAP-07
CCTV, Security & Fibre Optics
Security systems on industrial sites have to survive heat, dust and hazardous areas, and they have to talk to the plant. We design, install and maintain them as part of the E,I&C package.
- CCTV & AI analyticsCoverage design, cameras, thermal and explosion-proof units, VMS and AI analytics for intrusion, ANPR, PPE and fire.
- Access control & intrusionReaders, turnstiles, face terminals, intrusion panels and perimeter detection.
- Fibre-optic networksFibre routes, fusion splicing, OTDR testing and industrial Ethernet rings for SCADA and CCTV.
- Control roomsVideo walls, operator desks and VMS workstations for 24/7 monitoring.
- SCADA integrationSecurity events and camera pop-ups linked to plant alarms and the control system.
- MaintenancePreventive maintenance, health monitoring and remote support contracts.
CAP-08
Quality, Testing & Inspection
Quality is planned, not inspected in at the end. Every job runs on an inspection and test plan, with hold and witness points agreed with the client and records that prove each step.
- Inspection & test plansITPs, method statements and checklists agreed with the client before work starts, with hold and witness points.
- FAT & SATFactory and site acceptance tests with signed procedures, punch lists and closure records.
- CalibrationInstrument calibration on a traceable bench, with certificates for every device.
- Electrical testingInsulation resistance, continuity, primary and secondary injection and protection relay testing.
- Loop checks & pre-commissioningLoop folders signed from field device to HMI faceplate, ready for commissioning.
- Document controlControlled drawings and records, transmittals, red-lines and as-built packages handed over complete.
LIFECYCLE SERVICES
Support for the life of the plant.
SVC-07
Operation & Maintenance
Preventive maintenance programmes from daily to annual for I&C and electrical assets, O&M contracts and fast troubleshooting.
SVC-08
Manpower Supply
Field-proven E,I&C, mechanical and process specialists, commissioning teams and HSE officers, mobilised with tools and supervision.
SVC-09
Training
Operator and maintenance training on control systems, turbines and electrical assets, on site or at our Aden facility.
SVC-10
Procurement & Supply
OEM-backed supply of control hardware, drives, switchgear, instruments, spares and electrical bulk materials, with after-sales support.
HOW WE DELIVER
Six steps, one team.
- 01Consult & FEEDSite survey, front-end engineering and a clear scope, budget and schedule.
- 02Detailed engineeringE,I&C design, control philosophy, I/O lists, cause & effect and drawings in EPLAN and ETAP.
- 03Build & FATPanels built and programmed, then factory-tested with the client before shipment.
- 04Install & commissionInstallation, termination, loop checks, injection testing and commissioning on site.
- 05SAT & handoverSite acceptance, performance testing, as-built documents and operator training.
- 06SupportO&M, spares and remote support for the life of the plant.